1 of 6

B200 AD9361 RF 70MHz -6GHz SDR Software Defined Radio USB3.0 Compatible with USRP B200 Full duplex SDR

Sale Sold out Pre-order
Regular price $747.79 USD
Regular price $1,150.44 USD Sale price $747.79 USD
Tax included. Shipping calculated at checkout.

In stock

Ask a question
  • All orders are dispatched the next 3 business days!

  • We will beat any price. We back all products with a 1 year guarantee.

Add $299.99 more to get FREE SHIPPING!
$0.00

Order in the next 0 hours 0 minutes to get it by         /12/2025

Guaranteed Safe Checkout

Description
Item Specifics
 

These indicators are almost the same as the original, some better than the original

frequency

470M

900M

1800M

2400M

3200M

4000M

5000M

5600M

power

19dbm

19dbm

16dbm

13dbm

14dbm

12dbm

14dbm

8dbm

Test results:

 

Sudo./tx_waveforms --rate 0.5e6 --freq 470e6 --gain 90 -- AMPL 0.9 --wave-type SINE --wave-freq 0.1e6

 

Use the following test command to test the output power of each frequency:

 

Frequency index:

 

This product comes with a cover

 
This is the B200 compatible upgrade board of our shop. It is noted that B200 is not B210, but it upgrades the RF chip from AD9364 to AD9361 than the original B200, so it retains the ability to support dual channels. The FPGA firmware provided by us can support dual channels receiving or transmitting, but it does not support dual channels sending and receiving at the same time. If you only want to use single channel transceiver then use the original FPGA firmware, the original how to use this how to use, fully compatible.

Using ETTUS B200 schematic design, interface performance is consistent with ETTUS B200. The USRP B200 is not comparable to LIMESDR and BLADERF in terms of RF performance and drive stability. Some customers who have bought BLADERF and LIMESDR will buy USRP B200 later, especially for LTE testing applications, the B200 is much more stable

Equipped with USB3.0 cable.

 
The seller provides technical support.
Size: 150 mm * 100 mm
Support frequency: 70mhZ-6ghz;
TX port: two

RX port: two

See the interface

 
DC interface (6v). If GPSDO is not used and only single-channel transceiver is used, external power supply is not required. If GPSDO or dual-channel transceiver is used, external power supply is required.
Spartan 6 XC6SLX75 FPGA;
The AD9361 dual-channel RF transceiver chip supports up to 61.44mhz /s sampling rate
The board has a built-in clock accuracy of 2PPM and supports GPSDO or external reference clocks up to 1PPB(0.001ppm) accuracy.

Support UHD, GNURADIO, OPENBTS, OpenBTS-UMTS, SRSLTE, OpenAirInterface, GPS-SDR-SIM, MATLAB, LabVIEW, GQRX, GR-iridium, HDSDR, etc.

 

Description

Item Specifics