4pcs Ignition Coils + 4pcs Iridium Spark Plugs For 2007-2013 Mini R52 R57 R58 Cooper UF598 Ignition System Coil Wear Part

Specification

Condition: Brand New

Connector: 3 Pins 

Thread Diameter: 12

Thread Length: 26.5

• Built to strict quality control standards.     

• Ready to use, Direct Replacement.

• 100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

• 100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability

• Silicone rubber boot withstands extreme heat to ensure superior insulation

• Spark Plugs are using High-Performance Iridium metal, Much better than Nickel and Platinum

• It's suggested that ignition coil and spark plug be replaced in a sychronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start，engine vibration, misfiring, inadequate power, spark plug fouling and poor fuel economy

Package include:

4Pcs Ignition Coils + 4Pcs Spark Plugs

Interchange Part Number：

UF598, UF-598, 12137575010, 19005293, NGK97968, 97968

Fitment：

For Mini

• 2007-2007 Cooper R52 L4 1.6L Naturally Aspirated

• 2008-2013 Cooper R52/R57/R58 L4 1.6L Turbocharged

• 2011-2016 Cooper Countryman R58 L4 1.6L Turbocharged

• 2013-2016 Cooper Paceman R58 L4 1.6L Turbocharged

How to Change Ignition Coils and Spark Plugs?

This product recommends professional installation.

1. Disconnect the old ignition coil and spark plugs

2. Disconnect your battery’s negative terminal

3. Locate the ignition coil and spark plugs to be replaced.

4. Release the clip on the plug running into the side of coil.

5. Use a wrench to unscrew the bolts holding the original coil in place

6. Extract original ignition coil and spark plugs from the engine bay

7. Swapping in the new ignition coil and spark plugs

8. Prior to installation, compare the new coil to the old one

9. Orient the new coil in the same direction

10. Insert the bolts to hold the coil in place

11. Activate the New ignition coil and spark plugs

12. Connect the plug into the side coil

13. Plug in ignition cables according to the order written on them.

14. Reconnect the battery

15. Start the vehicle to test the new ignition coil and spark plugs

Note:

1. In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.

2. Pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.