Pops-a-dent Bridge Dent Puller Kits with 10pcs Glue Sticks Hot Melt Glue Gun PDR Tools

  • $32.00
    Unit price per 
  • Save $8
Tax included. Shipping calculated at checkout.

Pops-a-dent Bridge Dent Puller Kits with 10pcs Glue Sticks Hot Melt Glue Gun PDR Tools


Pops-a-dent Bridge Puller PDR Tools suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body,washing machine,etc...

With 7 different shapes tabs for all different dent(others is only have 6 shapes),works on small dent amd hail damage

The hot melt glue gun is 60W can use normally in 100V-240V electrical ,inside place the fuse ,use more safe,body of hot melt gun made of high quality which is very stable

The hot melt gun and hot melt mini glue sticks heat up very quickly,normally it need 3-5 minutes ,it will work for home or office repair like DIY Crafts /Circuit Board /Electronics /Toys / Metal/ /Artificial flowers / Cloths /wood / glass/ card ,ect...

Including 10 pcs hot melt glue sticks (5 pcs yellow color glue sticks,5 pcs black glue sticks ) diameter is 11MM which is high quality,super strong adhesive and easy cleaning properties to protect your health and items

Instructions:(Suit for dent&ding)
Bridge Puller + Hot melt glue gun + hot melt glue sticks
1.Clean damage surface with a damp clean cloth
2.Put the glue to gun and heat(also it need about 5-10min )
3.pull the trigger and apply the drawing gasket with extruded glue
(The 4 holes of gasket should be applied with hot melt glue)
4.immediately place pad in the center of the dent and hold until sticks
5.place stem of pad through hole pulling bridge and screw knob
6.tighten knob until pad pops off
7.clean the surface

1. Please use the hot melt gun in safe places without obstacles.
2. Make sure the surface which you want to stick is clean or it will not effectively
3. Please install the holder and put nozzle down in a smooth please while use it
4. This series product can use the diameter from 0.7mm-0.75mm of met glue
5. Insert the glue from the glue gun tail, sent to the gun tube, plug the glue gun electrical outlet to preheating from 5-8min
6. Button up to move the trigger and can extrude the melt gun and can control the melt glue quantity.(Note: Tap trigger propulsion device lightly, excessive force may damage the hot melt glue gun)
7. While it's working ,if the melt gun is inexhaustibility in one time ,then the melt glue need to take out, it can re-melt and be used in the next time
8. After it used ,please make sure to let it cool down then store it.



Packing list:
1 * Pops-a-dent Bridge
7 * Different Shape Pads
1 * Hot melt glue gun
10 * Hot melt glue sticks

We Also Recommend