PDR Pulling Bridge Dent Remover Hand Tool Set for Paintless Dent Repair+ Tap Down Knock Down Hail Removal Tools w/9 Heads

  • $20.00
    Unit price per 
  • Save $8
Tax included. Shipping calculated at checkout.


PDR Pulling Bridge Dent Remover Hand Tool Set for Paintless Dent Repair+ Tap Down Knock Down Hail Removal Tools w/9 Heads

Aluminum screw-on tipped tap down

Designed with POM tip head to prevent scratching of painted surfaces- Different shapes of head for different dents

Come with 9 different specifications of the point head

Eeasy to control,everyone can removral the dent by yourself

It is suitable for door ,ding,car dent removal,especially for tapping high points

How to use this paintless dent repair kits?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

Package List:

1pcs*Bridge Puller

1pcs*Tap down Knock Down Hail Removal Tools w/ total 9 Heads