Description
50k-3GHz NanoVNA-F V2 3G 4.3 Inch IPS TFT LCD HF VHF UHF UV Vector Network Analyzer 5000mA Battery Demo Kits
Description：
NanoVNA-F V2 portable vector network analyzer is a new generation product developed on the basis of NanoVNA-F . It adopts 4.3-inch IPS LCD display and aluminum alloy case , standard 5000mAh large-capacity lithium battery, battery life up to 7 hours , Support touch screen and side button operation , support Chinese and English interface. The design of this product is based on NanoVNA of edy555 and SAA V2 of OwOcomm, and deep optimization of the software is made on the basis of the previous generation product NanoVNA-F. The operation interface is compatible with NanoVNA-F , the measurement range is extended to 3GHz , and the dynamic range is larger. The measurement is more accurate and the operation is more convenient.
NanoVNA-F V2 portable vector network analyzer is a new generation product developed on the basis of NanoVNA-F . It adopts 4.3-inch IPS LCD display and aluminum alloy case , standard 5000mAh large-capacity lithium battery, battery life up to 7 hours , Support touch screen and side button operation , support Chinese and English interface. The design of this product is based on NanoVNA of edy555 and SAA V2 of OwOcomm, and deep optimization of the software is made on the basis of the previous generation product NanoVNA-F. The operation interface is compatible with NanoVNA-F , the measurement range is extended to 3GHz , and the dynamic range is larger. The measurement is more accurate and the operation is more convenient.
Features:
1. 4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes;
2. All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy;
3. The body size is 125mm*75mm*20mm, compact and portable;
4. The radio frequency interface is SMA, which is convenient for connecting all kinds of DUTs;
5. 5000mAh large-capacity lithium battery, battery life up to 7 hours;
6. Full touch screen design, with 3 side buttons at the same time, flexible and convenient operation;
7. Support Chinese and English interface;
8. Optimized UI design, convenient for users to perform measurement operations;
9. Support screen brightness adjustment;
10. The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable;
11. Standard high-quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy;
12. A USB power output interface is designed to support 5V/1A power output;
13. Using 2A high current charging IC, the charging time is shorter;
14. Supporting host computer software, the host computer supports Chinese and English interfaces;
15. The screen image of the device can be obtained by taking a screenshot of the host computer;
Product performance:
Frequency range: 50kHz-3GHz
RF output power: -9dBm (error within 1GHz: ±1dB)
Frequency accuracy: <0.5ppm
S21 dynamic range: 70dB (1.5GHz), 60dB (3GHz)
S11 dynamic range: 50dB (1.5GHz), 40dB (3GHz)
2-port return loss: 20dB typ (1.5GHz), 13dB min (3GHz)
Number of calibration points: 101 points
Number of scanning points: 101 points
Number of traces: 4
Number of mark points: 4 (the mark point bar can be moved up and down on the screen)
USB interface: USB Type-C communication mode: CDC (serial)
Setting save: 5 groups (after saving, it can be directly recalled when it is used next time, no need to recalibrate, and the saved parameters before the last shutdown will be automatically recalled when it is turned on next time)
Support calibration result interpolation, can measure without recalibration after adjusting the measurement frequency band
Scan time: about 1.9s/1 time (50kHz ~ 3000MHz full frequency band)
Can measure S parameters, voltage standing wave ratio, Smith chart, phase, group delay, etc.
Product acessories:
Host x1
SMA open calibration kit x1
SMA short-circuit calibration kit x1
SMA 50Ω load calibration kit x1
SMA-KK double head female hole adapter x1
SMA-JJ double-head male pin adapter x1
SMA-JKW elbow outer screw inner hole to inner screw inner needle adapter x1
20cm SMA-JJ RG405 RF cable x2
USB type-C data cable x1
Stylus x1
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.